The Business Behind Home Services.

Topics  ·  About  ·  Submit a Tip  ·  Advertise

Ferguson Says Repair Work Is Soft. Check Your Margins Before Blaming Demand

Ferguson says homeowner repair work is still soft, but the supplier’s residential sales grew 6%, mostly on HVAC, while price inflation ran low to mid single digits.

·

· 8 min read

An HVAC technician checks an outdoor air conditioning unit beside a house, reflecting demand in residential heating and cooling repair and replacement.

If your phones feel quieter this fall, Ferguson’s quarter can look like it came from another planet. The largest US plumbing and HVAC supply house reported $9.0 billion in sales, up 9.5%, and residential sales up 6%, while describing its homeowner business as under pressure with soft repair work. Both can be true at once, and neither one tells you whether your own company is losing demand or losing margin.

In its third-quarter release on November 9, Ferguson said US residential, about half of its sales, remained “pressured,” with weak new construction and continued softness in repair, maintenance and improvement work. The same release said residential sales still grew 6%.

Where the growth came from

Total Q3 sales were $9.0 billion, up 9.5%. Ferguson broke that into 7.0% organic growth and 2.7% from acquisitions, less 0.2% from Canadian divestments. The release also said “price inflation was low to mid single digits.” It does not say how much of the organic growth was price and how much was volume. Ferguson’s 10-Q does say that US growth came from price inflation, higher volume and acquisitions, so volume contributed too.

HVAC drove Ferguson's residential growth; plumbing and showrooms grew 3%
Q3 2026 · %
HVAC15%Residential trade plumbing3%Ferguson Home (showrooms)3%
Source: Ferguson call (transcript summaries). HVAC includes acquired revenue, and executives did not say how much of it is residential versus commercial. The article does not say whether the plumbing and showroom figures include acquisitions.
Show the data
Value (%)
HVAC15%
Residential trade plumbing3%
Ferguson Home (showrooms)3%

Digital Insider’s calculation, illustrative only: Ferguson gave a range, not a number. We assumed, as our own reading and not Ferguson’s, that “low to mid single digits” means price ran anywhere from 2% to 5%. On that assumption, 7.0% organic growth minus 2% to 5% leaves roughly 2 to 5 points for volume and everything else. At the low end, price would explain under a third of the organic gain; at the high end, roughly 70%. The filings don’t say where in that span the real figure falls.

Like this? Get it in your inbox every week.

What changed in home services this week, and what it means for your shop.

No spam. Unsubscribe anytime.

Ferguson measure (Q3 2026)ChangeNote
Total net sales+9.5%$9,026M vs. $8,245M
Organic growth+7.0%Includes price inflation, “low to mid single digits”
Acquisitions+2.7%FloWorks closed Aug. 31, so only part of the quarter
US residential+6%About half of sales; split between organic and acquired not given
HVAC+15%Per the earnings call; includes acquisitions
Residential trade plumbing+3%Per the earnings call
Ferguson Home (showrooms)+3%Per the earnings call
Non-residential+15%Industrial and commercial mechanical, large projects

The 10-Q says residential growth was “primarily due to growth in HVAC,” and, to a lesser extent, residential trade plumbing and Ferguson Home. On the call, as reported in transcript summaries, HVAC was up 15% while residential trade plumbing and Ferguson Home were each up 3%. Executives did not say how much of HVAC was residential versus commercial, or how much was acquired.

What the plumbing number does and doesn’t tell you

The channel that sells most directly to residential plumbing contractors, residential trade plumbing, grew 3%. That is a sales figure, and it blends price, volume and any acquired revenue. Ferguson gave no plumbing-specific price number. The low-to-mid-single-digit inflation it cited covers the whole company. On the call, management said commodities ran at mid single digits in Q3, with copper and steel up and plastics still deflating, while finished goods stayed in the low single digits.

So the 3% doesn’t establish what happened to plumbing volume, and this article doesn’t claim it does. What it shows is that the plumbing channel grew modestly, well behind HVAC’s 15%, which fits Ferguson’s own wording that repair work remains soft. Whether that matches your calls is something only your own numbers can answer.

The swing in residential is real: Ferguson’s first-quarter 2026 release showed US residential sales down 1%, against +6% in the third quarter. Two things flatter the comparison. Residential was up only about 1% in the same quarter a year earlier, according to Ferguson’s slide deck, and HVAC had help from acquisitions. Ferguson said it will keep expanding HVAC through dual-trade counters, new branches and acquisitions.

Watsco tells a more upbeat HVAC story

Watsco, the largest HVAC-only distributor, reported residential HVAC equipment sales up 7% in its third quarter: units up 5% and price up 2%. It described “continued improvement in end-market demand.” That reads rosier than Ferguson’s “soft.”

The two companies measure different things. Watsco sells HVAC equipment only, while Ferguson’s residential number blends plumbing, showrooms and HVAC. Ferguson’s HVAC figure also includes acquired revenue. Last year’s refrigerant changeover may have distorted the comparison period, though that is a possibility rather than something either company quantified. Neither result settles what your own phones are doing.

I look at this mainly through the plumbing side, and I wouldn’t say the industry is slowing down just because a distributor reports softer demand. I know firsthand that revenue doesn’t tell the whole story.

I pay attention to how many calls we’re generating, how many opportunities turn into booked jobs, our conversion rate and the average ticket. If call volume drops but booked-job conversion improves, that’s a very different situation from losing demand altogether. Contractors need to separate what’s happening in the overall market from what’s actually happening inside their own businesses. I also sell lead generation to home service companies, so telling owners that calls are only part of the picture cuts against my own commercial interest.

Ferguson’s margin and the cost side

Gross margin was 30.9%, down 40 basis points from 31.3%. Ferguson said last year’s margin was “temporarily elevated by the timing and extent of supplier price increases,” and the CFO said on the call that the company expected the step-down. Watsco also reported a lower gross margin, partly because manufacturer price increases were smaller than in 2025.

The reading for contractors is that when manufacturers raise prices together, the distributor can earn more for a stretch, and the increase moves down the chain to you. Ferguson’s own inflation figures describe what it sells, not what contractors charge homeowners. The company published no data on contractor tickets or call volume. Management said it expects price inflation in the fourth quarter to be similar.

That’s where the price book comes in. If your supplier increases prices and you’re still quoting jobs using outdated material costs, you’re giving away margin without even realizing it. We use ServiceTitan, and I believe keeping the price book accurate needs to be an ongoing process, not something you revisit once a year.

Open estimates are the other exposure, and I think contractors underestimate it. If you quote a job today and the customer doesn’t approve it for three weeks, you can end up working with completely different material costs by the time the job gets scheduled. On new quotes, we should be able to reflect updated costs as soon as they’re verified and entered into our pricing system. On outstanding estimates, it depends on how long the quote is valid and what we’ve committed to the customer. I can’t give you a verified example of a specific manufacturer increase we absorbed this year, but protecting margins on outstanding estimates is absolutely something owners should be thinking about.

Too many contractors obsess over getting more calls while overlooking what’s happening to their gross margins. You can increase revenue 30% and still end up with less money if your material costs, labor efficiency and pricing aren’t being managed properly.

A bigger supplier with a broader counter

Ferguson says it has completed eleven acquisitions this year. The largest, FloWorks, is an industrial valve and flow-control distributor that closed on August 31, so much of the growth Ferguson is reporting sits in industrial and commercial work, not homeowners.

The residential-relevant deal is Rogers Supply Company, which Ferguson said adds twelve locations across Illinois and Indiana “in support of our dual-trade offering,” meaning plumbing and HVAC under one roof. The price and Rogers’ revenue were not disclosed. CEO Kevin Murphy said on the call, as reported by Homepros, that Ferguson has a roughly $10 billion North American plumbing and HVAC business serving residential repair contractors, and that trade plumbing “benefited from its connection to HVAC.”

One company’s deals are not proof of an industry-wide wave. But if you buy from a Ferguson counter, or from a regional house in the Midwest, the direction of travel is toward larger owners with a broader offering at the counter.

I haven’t seen a specific ownership change or supplier expansion that I can point to as having materially affected our business, and one-stop shopping wouldn’t automatically convince me to move our purchasing. Convenience is great, but I weigh competitive pricing, inventory availability, delivery reliability and how quickly somebody can solve a problem when one of my technicians needs a part. A supplier that saves me 3% on materials but costs me hours of technician productivity isn’t necessarily saving me money.

Long term, consolidation worries me more than an individual material price increase. Material prices will fluctuate, and we can adjust our pricing, negotiate purchasing and work on efficiency. But when fewer suppliers control the market, contractors potentially lose negotiating leverage, purchasing options and competition. Before I’d move a significant amount of our purchasing, I’d want consistent competitive pricing, dependable inventory, reliable delivery, transparent account terms and someone who actually understands our business. And I’d want proof they could deliver on those promises.

Check your own numbers first

Ferguson’s quarter is one company’s result. It shows the fastest growth in industrial (+55%, including acquisitions), commercial mechanical (+17%) and HVAC (+15%), a plumbing channel that grew 3%, and a supplier getting bigger. It does not show what your market is doing, and it can’t tell you whether your margins held.

Here’s what I’ve learned operating home service companies: growing revenue and growing profit are two completely different things.

You can generate more calls, sell more jobs, and have your technicians running all day. But if your material costs are increasing, your pricebook is outdated, or your labor costs aren’t being managed, you can end up working harder for less money.

That’s why I wouldn’t look at Ferguson’s earnings and immediately conclude the plumbing market is slowing down.

I’d start by looking inside my own company.

Are we getting fewer opportunities? Are we converting fewer jobs? Is our average ticket changing? And most importantly, are we keeping enough gross profit from the jobs we’re completing?

Those answers tell me a lot more about the health of my company than one supplier’s quarterly earnings report.

Here’s an exercise to start with. Pull your supplier invoices from a year ago and list your 20 highest-spend materials. Compare last year’s unit cost to what you’re paying now, looking at copper and steel items separately from plastics, since Ferguson says those categories are moving in different directions. Then check two things: whether your pricebook reflects today’s costs, and whether your outstanding estimates were built on the old ones.

Sources

Written by

Meet the Digital Insider team →

The business behind home services, in your inbox

Your weekly read on the marketing, AI, private equity and tech changing how homeowners hire and how shops get bought.

No spam. Unsubscribe anytime.

Latest

More from Digital Insider

Run a home service business? Get the Insider.

One email a week on the marketing, AI, private equity and tech reshaping the trades. Written by an owner, for owners.

No spam. Unsubscribe anytime.