A. O. Smith says residential water heater demand is weakening while steel and freight costs climb. A December price increase could squeeze plumbing contractors who haven’t updated their replacement pricing.
A. O. Smith raised water heater prices this year and still sold fewer dollars of them in the third quarter. Its answer, announced the same week it reported results, is to raise prices again.
The company said on its Oct. 29 earnings call that water heater sales in North America fell 1% in the quarter because lower residential volumes more than offset pricing, according to the Benzinga transcript. In its quarterly filing, A. O. Smith said it has announced a further water heater increase of up to 9.5%, expected to take effect in December. That comes on top of the 4-7% increase that took effect at the end of the second quarter.
For a plumbing shop, the question is less how A. O. Smith is doing than what lands on your invoices in a few weeks, and whether your replacement tickets can absorb it.
Like this? Get it in your inbox every week.
What changed in home services this week, and what it means for your shop.
No spam. Unsubscribe anytime.
You’re in. Check your inbox (and drag us to Primary). 🔑
What a full 9.5% costs a shop doing 40 replacements a month
This is an illustration, not data from any real shop. It shows the size of the exposure if you don’t touch your prices.
| Illustrative plumbing shop | Figure |
|---|---|
| Monthly water heater replacements | 40 |
| Current equipment cost per unit | $900 |
| Additional cost per unit at 9.5% | $85.50 |
| Additional monthly cost | $3,420 |
| Potential annual impact if volume and costs stay constant | $41,040 |
This assumes the entire 9.5% reaches the contractor, applies to every model the shop buys, and is not passed on through selling prices. On a $2,400 installed ticket, $85.50 is about 3.6 points of gross margin gone on every replacement ($85.50 ÷ $2,400).
Why the increase is happening, and how much of it you should expect to see, comes down to what A. O. Smith reported.
The headline growth is mostly an acquisition
North America sales rose 3% to $761.6 million, the company said in its earnings release. That sounds healthy until you see what drove it. The release credits higher boiler volumes (boiler sales were up 13%), pricing and about $15 million from Leonard Valve, a company acquired in January 2026. It says those gains were “partially offset by lower residential water heater volumes.” Excluding Leonard Valve, organic sales rose 1%.
The 10-Q puts the Leonard Valve contribution at about $14.8 million and shows segment sales up $18.8 million from $742.8 million a year earlier. Digital Insider’s calculation: $14.8M ÷ $18.8M is roughly 79% of the dollar increase from the acquisition. The remaining $4.0M is about 0.5% of $742.8M. That sliver is everything else combined, with boilers and price pushing up and lower water heater volume pulling down.
| North America, Q3 2026 | Figure | Source |
|---|---|---|
| Segment sales | $761.6M, up 3% (vs. $742.8M) | Release; 10-Q |
| Organic growth, excluding Leonard Valve | +1% | Release |
| Water heater sales | -1% (dollars, net of price) | Earnings call |
| Segment margin | 23.6% vs. 24.2% a year earlier | Release |
| Segment earnings | $179.9M vs. $179.7M | Release |
The water heater figure is a dollar number. A. O. Smith has not disclosed a unit-volume percentage or the size of the price effect, so the -1% cannot be split into price and volume. All the company says is that price did not make up for the lost volume.
Why margin slipped even with higher prices
Segment margin fell 60 basis points to 23.6%. The release blames lower residential water heater volume and higher input costs, including steel and freight, which together more than offset boiler volume, pricing, Leonard Valve earnings and tariff refunds. Management put the earnings hit from lower water heater volume at about $3 million for the quarter, per the Benzinga transcript.
The tariff refunds were a one-time help. The CFO said A. O. Smith received $10 million of refunds of tariffs charged under the International Emergency Economic Powers Act in the third quarter, according to the Motley Fool transcript. Because those credits won’t repeat, the underlying squeeze on margin was bigger than the 60 basis points suggests.
Management also acknowledged a lag between cost spikes and price increases, according to Yahoo Finance’s summary of the call. That means fourth-quarter margins face pressure before the December increase takes full effect. The stated aim of the increase is to restore the balance between prices and costs going into 2027, assuming costs stabilize.
What management says is driving costs and demand
These points are management’s statements on the call, not independent data:
- Steel and freight costs will each rise about 15% in 2026 versus 2025, adding roughly 5% to North America cost of goods sold. The company expects to exit the year at a meaningfully higher cost level. Analysts on the call noted they could not recall a water heater increase this large outside of efficiency-standard changes.
- U.S. residential water heater industry volume will fall by low single digits in 2026, with commercial flat, according to Yahoo Finance’s summary. Management cited high interest rates and low home turnover limiting proactive replacements. It said the softness is greatest in the wholesale channel, meaning the distributors who sell to contractors, and described commercial volumes as resilient.
- CEO Steve Shafer said competitors have announced similar price changes on similar timing and that the whole industry faces the same steel and freight realities, per Yahoo Finance’s summary. Rheem’s and Bradford White’s own December announcements were not found. Trade-press roundups, including Supply House Times, have logged earlier 2026 increases from A. O. Smith (7% effective June 22) and from Bradford White (5-6.5% starting March 16), which fits the CEO’s description of an industry-wide cost event. It is still his claim for December.
Management also said 80-85% of its North America sales are replacement demand. If that is right, the volume that has gone missing is probably not emergency swaps of failed heaters, which owners cannot defer. It is more likely the proactive replacements that management ties to rates and housing turnover. That is Digital Insider’s reading of management’s explanation, not something the company measured.
What this does and doesn’t tell you about your shop
A manufacturer’s sales to distributors are not installs. A. O. Smith’s softness may reflect distributors trimming inventory, the mix of brands your supply house stocks, or genuine drops in replacement work. The numbers cannot tell you which, and they do not show that your call volume is down. Your own replacement-job count tells you that.
The cost side is more concrete. If the up-to-9.5% increase reaches you in full on top of the 4-7% already in effect, Digital Insider’s calculation is a cumulative list-price rise of roughly 14% to 17% (1.04 × 1.095 = 1.139; 1.07 × 1.095 = 1.172). That is a ceiling, not a forecast. “Up to” and “most products” mean it will not be a flat 9.5% on every model, and what you pay depends on your distributor’s pricing and your brand mix.
A few specific things follow:
- Get your supplier’s actual increase letter and match it to the models you install most. Ask whether pre-buy pricing is available before the December effective date. Buying ahead is a cash and storage decision, so compare it with your own replacement count before leaning on A. O. Smith’s demand story.
- Pull your replacement tickets for the last 12 months. If your count is holding steady while A. O. Smith reports lower volumes nationally, your shop may be performing differently from the manufacturer’s broader market. It doesn’t prove you’ve gained share, but it’s a reason to trust your own operating numbers over national assumptions.
- Check whether your pricebook actually recalculates when equipment cost changes. A percentage markup only passes the increase through if the selling price updates from the new cost. A static flat-rate pricebook, whether it lives in ServiceTitan or another field-service platform, can keep outdated prices even when your pricing policy says percentage markup. If your book adds a fixed dollar amount to equipment cost, the markup won’t grow with the increase.
- A manufacturer raising prices into a soft market suggests it expects distributors and contractors to pass costs along. That works only if your customers see replacements as necessary, so price the difference into the ticket rather than hoping volume covers it.
One company’s quarter is one company’s quarter. A. O. Smith is a large maker, and the CEO says rivals are moving too, but the numbers here are the company’s own sales and margins, and the demand read is management’s. What an owner can act on is the December price letter and the replacement count in their own books.
Related coverage
Sources
- A. O. Smith Q3 2026 earnings release (8-K Ex. 99.1), Oct. 29, 2026
- A. O. Smith Form 10-Q, quarter ended Sept. 30, 2026
- A. O. Smith Q3 2026 earnings call transcript (Benzinga)
- A. O. Smith Q3 2026 earnings call transcript (Motley Fool)
- Yahoo Finance: A. O. Smith Q3 2026 call summary
- Supply House Times: PHCP-PVF price increases, June 2026



